Julie Bowersett

juliebowersett{at}gmail{dot}com
Navigation
Search
Categories

Blog Writing Course Alumni

From Guide to Art Schools

CraftGossip

Entries in tablecloth (1)

Tuesday
May012012

Oilcloth Table Covers

My kids are really hard on my kitchen table.  They are even harder on the plastic table cloths I use to cover it.  Here is an area where I totally FAIL in my attempt to live a greener life.  I have been buying cheap, fleece-backed vinyl tablecloths which, have a life span of a couple of months (tops) at my house.  They are not really washable (I tried, it was a disaster) and my youngest will inevitably poke a hole with his fork two days after I put a new one on the table.  Did I mention the binder clips?  To keep the cloth in place I have resorted to using extra large binder clips to clip it to the table frame.  Trust me, it's a pain.

So, a few months ago I got the idea that I should make some fitted table covers from oilcloth and see if they stood up better.  My first problem was finding oil cloth that I liked.  I like neutral and muted colors in my house and most of the oil cloth I found was LOUD floral prints.  I finally located some gingham check, one in green, one in brown, that I liked.

The first step was to make a pattern on my kitchen table top.  I used some non-woven landscape fabric from Lowes for this step.  I laid a piece on top of the table and traced around the edge.  I then folded the shape in half each direction, roughly matching the traced lines.  I added 3" along the outside edge of one quarter and cut four layers at once with my rotary cutter.  I cut my fabric out using the pattern.

Next, I serged elastic all around the cut edge of the oval, stretching the elastic as I sewed.  To determine the length of elastic required you need to measure around the circumference of your shape.  You will need approximately half that length in elastic.  I did not quarter my elastic and oval -- I simply sat down at my serger, anchored one end of the elastic with some stitches and then stretched as I sewed.  When I had applied the elastic all the way around to the start I overlapped the ends slightly.  It worked just fine.

I also made a fitted table pad using a purchased pad that I cut to the same pattern and applied elastic to in the same manner.  I put that on underneath the oilcloth to help protect the table some more from those fork pokes.

I have found some really cute oilcloth patterns at Hart's Fabric and may order a couple more pieces.  So far, this table cover has held up remarkably well, still looks brand new after a month's use and cleans up beautifully.  I dream of the day when I can uncover the cherry wood that is hiding under the cover, but until then I think this will act as a good protectant.